an extensive study of fischer-tropsch synthesis (fts) on alumina-supported cobalt catalysts with different amounts of cobalt is reported. up to 40 wt % of cobalt, is added to the catalysts by impregnation method. the effect of the cobalt loading on the reducibility of the cobalt oxide species, dispersion of the cobalt, average clusters size, water-gas shift (wgs) activity and activity and selec...

RECEIVED DATE (to be automatically inserted after your manuscript is accepted if required according to the journal that you are submitting your paper to) Preparation of high-quality single-walled carbon nanotubes (SWNTs) has been advanced by controlling several parameters including the catalyst and the catalyst support material. Although zeolite has been frequently used as a catalyst support ma...

This paper presents the synthesis and characterization of monometallic and bimetallic cobalt and iron nanoparticles supported on alumina. The catalysts were prepared by a wet impregnation method. Samples were characterized using temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), CO-chemisorption, transmission electron microscopy (TEM), field emission scanning electr...

The electroreduction of water for sustainable hydrogen production is a critical component of several developing clean-energy technologies, such as water splitting and fuel cells. However, finding a cheap and efficient alternative catalyst to replace currently used platinum-based catalysts is still a prerequisite for the commercialization of these technologies. Here we report a robust and highly...

Fischer-Tropsch synthesis (FTS) is normally carried out with either a cobalt or iron-based catalyst depending on the ratio of H2/CO in the feed. As a step in gas-to-liquids (GTL) technology, cobalt catalysts are often preferred [1,2] due to the low intrinsic water-gas shift (WGS) activity of cobalt. While in many typical supported-metal catalysts, a low metal loading is preferable for obtaining...

Fischer-Tropsch synthesis is a part of Gas-to Liquids (GTL), Biomass-to-Liquids (BTL) and Coal to Liquids (CTL) technologies, which produce alternatives clean fuels from natural gas, biomass and coal. The catalytic performance of cobalt catalysts in Fischer-Tropsch synthesis strongly depends on the size of cobalt particles in nanoscale range (6-30 nm). Cobalt catalysts are usually prepared via ...

An extensive study of Fischer-Tropsch synthesis (FTS) on alumina-supported cobalt catalysts with different amounts of cobalt is reported. Up to 40 wt % of cobalt, is added to the catalysts by impregnation method. The effect of the cobalt loading on the reducibility of the cobalt oxide species, dispersion of the cobalt, average clusters size, water-gas shift (WGS) activity and activity and s...

Six Co-Rh/Fe3O4 catalysts with different cobalt loadings were prepared by the co-precipitation of RhCl3, Co(NO3)2, and Fe(NO3)3 using Na2CO3 as the precipitant. These catalysts were tested for dicyclopentadiene (DCPD) hydroformylation to monoformyltricyclodecenes (MFTD) and diformyltricyclodecanes (DFTD). The results showed that the MFTD formation rate increased with increasing cobalt loading, ...

A cobalt-based molecular catalyst was successfully grafted to a fullerene derivative via 'click' chemistry on an electrode for both electro-catalytic and light driven water reduction. Using an organic photovoltaic electrode immobilized with a cobalt catalyst as the photocathode, the photoelectrochemical cell displayed a stable photocurrent.